Author Topic: High resolution 32 bit texture pak compilation (Read 112550 times)

[BTF] Reflex · « **Reply #30 on:** March 25, 2010, 12:16:08 PM »

Quote from: |iR|Focalor on March 24, 2010, 01:12:45 PM

Quote from: R1CH on March 22, 2010, 02:53:28 PM
What does it look like? Mine looks fine:

What settings are you using? Looks like I really have no natural light source or shadows. I don't really want the shadows on entities like players and ammo boxes, those look kinda crappy. Looks like you have them off.

To eliminate shadows on players and ammo/guns/items

Set your video stuff to what shadowy-ness you like, with a lower gl_modulate setting.
do a vid_restart to have settings take advance
then do gl_modulate high (100) after the vid_restart.

This makes the items bright and the map regular.
Down side is you have to run that cfg at the start of every map, since mapchange restarts your video

|iR|Focalor · « **Reply #31 on:** March 25, 2010, 08:18:00 PM »

Quote from: [BTF] Reflex on March 25, 2010, 12:16:08 PM

To eliminate shadows on players and ammo/guns/items

Set your video stuff to what shadowy-ness you like, with a lower gl_modulate setting.
do a vid_restart to have settings take advance
then do gl_modulate high (100) after the vid_restart.

This makes the items bright and the map regular.
Down side is you have to run that cfg at the start of every map, since mapchange restarts your video

Actually, I was talking about the shadows that are cast on walls and the floor FROM entities, not the shadows from low light areas on the entities themselves.

Quote from: R1CH on March 24, 2010, 09:39:08 PM

Your gl_modulate is too high.

Had it set at 7. 3 or 4 adds a nice bit of shadows without making it look too dark overall.

If you compare the tops of the walls in your screenshot and mine, there is obviously a difference. Your textures (on the floor especially) look a lot sharper. Is there any way I can eliminate those jagged edges and sharpen it up, or is that just a symptom of my resolution itself?

Game resolution/desktop resolution: 1024 x 768
Video card: Nvidia GeForce 7600 GT

Slayer :D · « **Reply #32 on:** March 25, 2010, 08:36:24 PM »

Holy cow HUUUUUUUUUGE screen sizes. Is that what you guys normally play with (I use 920x760)?

VaeVictis · « **Reply #33 on:** November 30, 2010, 11:25:52 PM »

Zeppelin · « **Reply #34 on:** December 01, 2010, 11:02:37 AM »

|iR|Focalor · « **Reply #35 on:** December 01, 2010, 11:07:06 AM »

I agree. Impowtint shit rite heeuh.

DAGAN · « **Reply #36 on:** July 12, 2011, 05:18:24 AM »

loves this client and 32 bit textures

though will Rich ever add more resolutions to r1gl :S doesnt have 1920x1080

VaeVictis · « **Reply #37 on:** July 12, 2011, 08:53:14 AM »

Quote from: DAGAN on July 12, 2011, 05:18:24 AM

loves this client and 32 bit textures

though will Rich ever add more resolutions to r1gl :S doesnt have 1920x1080

you can force custom resolutions if you need

[BTF] Reflex · « **Reply #38 on:** July 12, 2011, 10:17:58 AM »

Quote from: |iR|Focalor on December 01, 2010, 11:07:06 AM

I agree. Impowtint shit rite heeuh.

Deff needs stickied, but maybe move to FAQ's or something?
I'm not sure where to stick the stuckied thread

jägermonsta · « **Reply #39 on:** July 12, 2011, 10:43:02 AM »

wowy, gonna try this out!

hey where is a good pak editor? ima make a new one

|iR|Focalor · « **Reply #40 on:** July 12, 2011, 10:57:19 AM »

Quote from: jägermonsta on July 12, 2011, 10:43:02 AM

wowy, gonna try this out!

hey where is a good pak editor? ima make a new one

PakScape v0.11 - http://focalor.tastyspleen.net/pakarchivemainmenu.html

DAGAN · « **Reply #41 on:** July 13, 2011, 02:10:40 AM »

how do I force it to use custom res?

VaeVictis · « **Reply #42 on:** July 13, 2011, 02:33:49 AM »

Quote from: DAGAN on July 13, 2011, 02:10:40 AM

how do I force it to use custom res?

r_customheight

r_customwidth

and gl_mode set to the right number, but i forgot which one is custom

its -1 in aprq2 but i know its not that in r1q2

DAGAN · « **Reply #43 on:** July 13, 2011, 07:59:22 AM »

yeah found them, but setting it to -1 for r1gl doesnt allow it to go full screen

but not having gl_mode "#" in my cfg and the force commands it is working fine

love the gl_coloredlightmaps 0 though

VaeVictis · « **Reply #44 on:** July 13, 2011, 08:39:05 AM »

Quote from: DAGAN on July 13, 2011, 07:59:22 AM

yeah found them, but setting it to -1 for r1gl doesnt allow it to go full screen

but not having gl_mode "#" in my cfg and the force commands it is working fine

love the gl_coloredlightmaps 0 though

that one cvar alone is why i would NEVER be able to stand using stock quake2

Author Topic: High resolution 32 bit texture pak compilation (Read 112550 times)

El Box de Shoutamente