Author Topic: Q2 and Radeon 9600 issues. (Read 4521 times)

chimp · « **on:** March 27, 2006, 10:46:39 AM »

Does anyone here have a Radeon 9600? We have them in our machines at work and I can't get Q2 to look right. It looks like it is running in software mode or something. However, it looks great in UT2004 and Q3. Any thoughts? Is this a known issue?

[BTF]adam · « **Reply #1 on:** March 27, 2006, 11:01:54 AM »

I've heard all ATI cards have some trouble with quake II, and that they often require a bit of tweakage to get looking right, while I cant address your problem head-on, I suggest looking through the Troubleshooting section, and read a bit in there, many people have posted with ATI problems.. luckily I dont get this problem: 3dfx Voodoo III 16MB.

chimp · « **Reply #2 on:** March 27, 2006, 11:08:36 AM »

Cool. Thanks.

X'tyfe · « **Reply #3 on:** March 27, 2006, 11:09:14 AM »

ati cards have driver issues, there cards dont work right for alot of people and in alot of games
they dont make um as good as nvidia

you have my sympathies lol

chimp · « **Reply #4 on:** March 27, 2006, 11:22:03 AM »

I have heard that before. Too bad I can't convince the IT DEPT to order me a pair of 7900GTX's.

deft · « **Reply #5 on:** March 27, 2006, 11:27:51 AM »

my board is fast and danger

chimp · « **Reply #6 on:** March 27, 2006, 11:35:13 AM »

Best rapper of all time....

Punk_FAS · « **Reply #7 on:** March 27, 2006, 02:50:26 PM »

Where's that from again "fast and danger"

Anyway, I have a Radeon X800GTO (clocked and pipes opened to be identical to an X850XT), and I have no problems at all with Q2. My framerates are significantly lower than my old 6800, but they're still 350+ or so with timerefresh (6800 was 800-1000), so it's not an issue.

X'tyfe · « **Reply #8 on:** March 27, 2006, 03:02:42 PM »

wow thats pretty damn bad

Mr._X · « **Reply #9 on:** March 27, 2006, 04:25:26 PM »

Quote from: chimp on March 27, 2006, 10:46:39 AM

Does anyone here have a Radeon 9600? We have them in our machines at work and I can't get Q2 to look right. It looks like it is running in software mode or something. However, it looks great in UT2004 and Q3. Any thoughts? Is this a known issue?

My friend just got an ati 9550 and it plays Quake2 horribly in GL mode. HE gets faster FPS in software mode. He has 2.6ghz P4, but he says warcraft plays very smoothly now, so at least it did what he wanted it to do, fix warcraft!

digency · « **Reply #10 on:** March 28, 2006, 08:57:04 AM »

I bought a Radeon 9600 se card for 40 bucks off my friend, because I wanted a better card than my Geforce 3 Pure, obviously after installing it, my Q2 played worse and slower than what my Gf3 did. So I figured its garbage, and sold it off on craigslist.com for 100 bucks. (fortuately the guy who bought it, wanted it for its dual monitor capabilities)

Lesson Learned: Stick with NVIDIA!

RRBM [NL] · « **Reply #11 on:** March 28, 2006, 09:07:07 AM »

Quote from: RRBM [NL] on March 28, 2006, 08:56:48 AM

I play Quake 2 with a ati radeon x740xl card and use the Aprq2 client to play online, but r1q2 works also good. Make sure you have the following lines in your config :

set gl_swapinterval "0"

X'tyfe · « **Reply #12 on:** March 28, 2006, 09:31:31 AM »

Quote from: digency on March 28, 2006, 08:57:04 AM

Lesson Learned: Stick with NVIDIA!

spread the word !!

RRBM [NL] · « **Reply #13 on:** March 28, 2006, 10:34:49 AM »

Here is something I forgot to add in my reply :

default opengl driver = set gl_driver "opengl32"
sync every frame = set gl_finish "0"

You can also add these lines in your config.

Punk_FAS · « **Reply #14 on:** March 28, 2006, 11:14:39 AM »

ATI is fine and dandy in other games, but for some reason (maybe intentional or not), Nvidia stuff generally does a LOT better, or has a lot higher framerates, with the Quake & Doom series (or anything made by iD).

Author Topic: Q2 and Radeon 9600 issues. (Read 4521 times)

Mr._X

El Box de Shoutamente