Author Topic: MY dream system.. well, not dream, but.. you'll see. (Read 10174 times)

ĄƦçɧąɳɠҾԼ · « **Reply #30 on:** October 30, 2005, 04:29:11 PM »

Believe it or not I have not really played Doom 3, but I've heard that Q4 runs better than Doom 3 does.

I've read that the FX line was not as good as the GeForce 4's, so I'm not surprised that you'd be able to run it better than me.

Quote from: Wikipedia

As a matter of fact, the mid-range Geforce FX did not even advance performance over the chips they were designed to replace, the GeForce 4 Ti. In DirectX 8 applications, the 5600 lost by a considerable margin to the Ti 4200. Likewise, the entry-level FX 5200 performed worse than the GeForce 4 MX 440, despite the FX 5200 possessing a better 'checkbox' feature-set. Value-oriented gamers shunned the MX 440 and 5200 and opted for the Radeon 9000/9200 or paid more for the proven and very capable Ti 4200 which because of its age was now priced below the Radeon 9600/GeForce 5600.

http://en.wikipedia.org/wiki/GeForce_FX

X'tyfe · « **Reply #31 on:** October 30, 2005, 04:34:05 PM »

when i was looking for a new card
i wanted to get the fx 5950, which after looking at the specs, was only slightly better then my current card

is this the same for the geforce 6 series? or is it a big leap over the fx series

ĄƦçɧąɳɠҾԼ · « **Reply #32 on:** October 30, 2005, 04:44:05 PM »

The GeForce 6 series is a big leap over the FX.

You can read about it here, http://en.wikipedia.org/wiki/GeForce_6

http://en.wikipedia.org/wiki/Nvidia

X'tyfe · « **Reply #33 on:** October 30, 2005, 04:53:31 PM »

thanks solo

i wish i had known this before
even more reason to buy a geforce 6 card

[BTF]adam · « **Reply #34 on:** October 30, 2005, 11:30:17 PM »

Oh, cool then =) Quake 4 get ready for some n00b skills coming yer way in july from me!

[BTF]adam · « **Reply #35 on:** November 26, 2005, 01:54:47 PM »

aight guys, when i get my new PC, i wanna use the old parts of this to build a crappy one for the family as i said before, the old crappy puter will be in the other room, i can drill through the wall to shove a nescacary cable through etc. the thing is, can i share this connection with that old puter? i think its that the other puter needs a network card, then an ethernet cable go's from the router to the other puters network card, am i right? also, how much would it cost to do this?

ĄƦçɧąɳɠҾԼ · « **Reply #36 on:** November 26, 2005, 02:02:41 PM »

Your right, and it shouldn't cost much at all.

Network cards are relatively cheap.
http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=42061

And so are ethernet cables,
http://www.ebuyer.com/customer/products/index.html?rb=13383890297&action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=20832

Just make sure your getting a "patch" cable and not crossover.

[BTF]adam · « **Reply #37 on:** November 26, 2005, 02:14:26 PM »

Wow.. very cheap! Would I have to do any silly configuration? im not experienced at that, or is it just "plug and yer on"

[BTF]n0ctuary · « **Reply #38 on:** November 26, 2005, 02:28:53 PM »

Assuming you have a hardware firewall, you should be fine. If you don't have one you'll need one.

Don't forget a cool case for your computer, because a computer in a stylish case runs faster than one in an ugly one.

www.newegg.com

On there somewhere.

X'tyfe · « **Reply #39 on:** November 26, 2005, 02:38:16 PM »

a hardware firewall is required? since when
i have one, was expencive

and im not even sure its doing anything

[BTF]adam · « **Reply #40 on:** November 26, 2005, 02:47:00 PM »

lol the router has an inbuilt firewall... ill get a cool case if i can afford it lol.. and you wouldent want my pc to run better than my p2 anyway, cos ill just beat you easier

X'tyfe · « **Reply #41 on:** November 26, 2005, 02:50:20 PM »

i dont think you can afford to by a pc thats better then mine

[BTF]adam · « **Reply #42 on:** November 26, 2005, 03:16:43 PM »

*resorts to childish remark about penises* Well I dont think YOU can afford a cure for IMPOTENCE! MOOAHAHAHAHAHHA

[BTF]n0ctuary · « **Reply #43 on:** November 26, 2005, 03:23:05 PM »

Quote from: Xtife on November 26, 2005, 02:38:16 PM

a hardware firewall is required? since when
i have one, was expencive and im not even sure its doing anything

It's required if you want to have more than one computer connected to the internet at once. I've been told that what most people call routers are not actually routers but hardware firewalls with NAT. I could be wrong though.

My firewall works pretty well. It would work better if i took the time to set up a static IP for my computer and set up port triggering. But I'm lazy.

X'tyfe · « **Reply #44 on:** November 26, 2005, 04:51:49 PM »

first time iv heard of that

i never liked routers all that much
the last i had a firewall that i couldnt turn off

and it only alowed a few ports to be opened for all computers
routers require alot of work to setup, and then it would still be hard to for everythign to work properly

not worth it IMO, plus since i already have a hardwarer firewall and stuff aswell
im just gunna go for a switch or something

iv been wanting to get a gigbyte one for awhile, the hub i have is a big bottleneck as it only runs at 10mbds. But i finaly have an excuss to get a new one!!

got a new computer that needs the internet. but my hub is one port short

Author Topic: MY dream system.. well, not dream, but.. you'll see. (Read 10174 times)

El Box de Shoutamente