Mouse tweaks

[CodeBlack]

 
Still trying to figure out best settings for m_yaw and m_pitch..

[SquareHimself]

It's Hz, not MHz :p This is an important distinction!

Most likely your mouse doesn't support a higher polling rate if you're having problems getting it there. To be honest, if you're under or at 125FPS, anything above 125Hz is pretty unnecessary (as 125Hz means, literally, 125 polls per second which matches exactly with 125 frames per second, creating one poll per frame). Not to mention that the mouse is polling with an 8ms response time, while your body's response time is about 200ms or more. One could put up a good argument that you're simply wasting cpu cycles by increasing the polling rate above 125Hz. Also, 500Hz and 1000Hz are a single millisecond delay apart, meaning that by using 1000Hz over 500Hz, you really are just plain wasting CPU cycles.

As for DPI, I'd say... high DPI for high sensitivity and low DPI for low sensitivity. You need more precision with a high sensitivity, not so much for a low sensitivity. Most of it is preference, though.

The m_pitch being lower than m_yaw suggestion sounds interesting...

By the way, I use 900 DPI at 500Hz.

[CodeBlack]

LOL @ myself for mz/mhz.
Anyway, im still trying, no results..
railwolfff come backk 

[yahoo]

anyone experiencing that sometimes (only in playing q2) the mouse moves by itself like turns around fast or something? Im using an optical mouse.

[CodeBlack]

yah, usually thats when u lift it, but i also had it while spawning..

[yahoo]

but i also had it while spawning..

same here.. whats weird is that sometimes it just do that..