Hewell vs dont run Q2DM1

[[MAGE]Techyon]

Enjoy kiddo's
I recorded it with Fraps, uploading the second half right now too..

My favorite commentary is at 3:00


http://www.youtube.com/watch?v=B6BKybLfr7Y

[VaeVictis]

why did you put a losing pov match of dm1 of a guy that just kept rushing on youtube -.- i dont get it... really boring... :/

anyway, not bad quality, i do suggest you tone down your sounds a little bit, they sounded like they were set too high which made em crackly, either that or somethin else was wrong with em... and for videos ya might wanna try somethin different with your video settings, the gamma way up with gl_coloredlightmaps 1 looks like shit imo but maybe tahts just me, old schoolers probably prefer it that way

[[MAGE]Techyon]

I jumped in the server late, decided that was too funny and fired Fraps up.. I tried doing a quick compression on the video to get it uploaded,.. I went from 3g each vid to around 150mb in flv format.
So thats why its very lossy looking.
Yes as for my config, its the same one I have used since around 1998.

Just for the giggles of it.. heres how I have my autoexec.cfg
I wrote this when I was back in the day of dialup access.. so alot of its just blocked, but never deleted.
May need touched up these days though

cl_gun 0
m_filter 1


// Sniper Zoom
bind kp_del +sz
alias +sz "fov 40;set sensitivity 5.000000"
alias -sz "fov 110;set sensitivity 21.00000"
// End Zoom

// Weapon Binds

//alias bind
bind kp_end +quickgrenade
alias +quickgrenade "use grenades;+attack"
alias -quickgrenade "-attack; weaplast"

bind \ "use chaingun;use super shotgun;"
bind MWHEELDOWN "use railgun"
bind MWHEELUP "use rocket launcher"

//Bind

//The following affect lighting
set cl_particles "1"      //(default=1)particles -MEDIUM FPS loss when set to 1-
//set gl_dynamic "0"      //(default=1)dynamic lighting -LARGE FPS loss when set to 1-
set cl_lights "0"      //(default=1)dynamic and flashes -Also LARGE FPS loss when set to 1-
set gl_flashblend "1"      //(default=0)enables glow feature -LOW FPS loss when set to 0-
set gl_polyblend  "0"      //(default=1)enables change of colors when getting Quad, underwater, etc -MEDIUM FPS loss when set to 1-
set vid_gamma ".75"
set intensity "2.75"
set gl_modulate "6.0"

//The following affect blurryness and texture quality
set gl_ext_palettedtexture "0"   //(default=0)uses 8 bit textures -MEDIUM FPS loss when set to 1-
set gl_picmip "0"               //(default=0)lowers image quality as numbers get bigger -LARGE FPS loss when set to 0-
//set gl_playermip "0"      //(default=0)uses less memory and in return blurs images -MEDIUM FPS loss when set to 0-
set gl_round_down "1"           //(default=0)disables resizing of textures -MEDIUM FPS loss when set to 0-

//The following affect flickering
set gl_ztrick "0"               //(default=0)makes objects not flicker WELL WORTH A FEW FPS-MEDIUM FPS loss when set to 0-

//The following affect texture filter
set gl_texturemode GL_LINEAR_MIPMAP_NEAREST //Enables bilinear filtering -LOW or no change if enabled-

//The following affect internet play
//set rate "8000"                 //(default=25000)Use this line if you have a 28.8  or 33.6 modem
//set cl_maxfps "43"              //(default=90)Use this line if you have a 28.8  or 33.6 modem
//set rate "8000"               //(default=25000)Use this line if you have a 56k or faster connection.
set cl_maxfps "100"            //(default=90)Use this line if you have a 56k or faster connection.

//The following affect sound
//set s_loadas8bit "0"      //(default=1)loads 8 bit sound -MEDIUM FPS loss when set to 0, More disk swapping if 0-
set cd_nocd "1"         //(default=0)doesn't play CD audio -LARGE FPS loss when set to 0-
//set gl_skymip "3"               //(default=0)makes the sky blurry -MEDIUM FPS loss when set to 0-
//set s_khz "22"                  //(default=11)changes sampling rate for sound -MEDIUM FPS loss when set to 22-
set cl_footsteps "1"            //(default=1)hear your own footsteps -LOW FPS loss when set to 1, Gets annoying though-

//The following affect particle sizes
set gl_ext_pointparameters "1"  //sets particle attributes
set gl_particle_size "40"       //sets particle attributes
set gl_particle_min_size "2"    //sets minimum particle size
set gl_particle_max_size "40"   //sets maximum particle size
set gl_particle_att_a "0.01"    //sets particle attributes
set gl_particle_att_b "0.0"     //sets particle attributes
set gl_particle_att_c "0.01"    //sets particle attributes
set cl_predict "1"

[VaeVictis]

I jumped in the server late, decided that was too funny and fired Fraps up.. I tried doing a quick compression on the video to get it uploaded,.. I went from 3g each vid to around 150mb in flv format.
So thats why its very lossy looking.
Yes as for my config, its the same one I have used since around 1998.

Just for the giggles of it.. heres how I have my autoexec.cfg
I wrote this when I was back in the day of dialup access.. so alot of its just blocked, but never deleted.
May need touched up these days though

gl_coloredlightmaps <-- best command EVER lol no more really colored lights to make the maps ugly lol drop it down to like .2 or even .5 and youll probably fall in love with it quake2 just looks better with less color in the lights

judging by your rail trail id guess your using r1q2... both r1q2 and aprq2 have this command, i definitely suggest checking it out but hey old schoolers might just prefer the orange, idk

EDIT: also, since its just for laughs, throw it into a video editor, run it at double speed and throw a funny song to it lol would be better than trying to preserve the feel of the match... i found it quite boring to watch a guy get fragged 30 times :/ kept waiting for the most epic of epic comebacks lol

[[BTF] Reflex]

I wanna see vae's video


He's right about coloredlightmaps though,  best thing since straf jumping.