Author Topic: Why I will never (Read 8673 times)

UUD-40 · « **on:** April 21, 2008, 11:32:10 PM »

Vacuum my pc again!

From Electrostatics.net:

Quote

Shocks when using the vacuum cleaner
When dust travels in the air sucked through a vacuum cleaner it impacts on the pipe walls and other internal parts. These impacts generate static charges on the particles and on the pipe walls. If these parts are made from plastics or other insulating materials they can charge up and give static shocks. Rotating parts such as carpet beaters can also charge up through rubbing action. If the suction pipe has a metal coil and is not earthed, this can charge up and give quite an energetic spark.

Would never have thought of that.

use compressed air.

jägermonsta · « **Reply #1 on:** April 22, 2008, 08:41:10 AM »

The old lungs work pretty good too.

DWxchzrles · « **Reply #2 on:** April 22, 2008, 04:21:22 PM »

i have to clean the inside of the computer?

never have!

|iR|Focalor · « **Reply #3 on:** April 22, 2008, 06:48:08 PM »

Quote from: jägermonsta on April 22, 2008, 08:41:10 AM

The old lungs work pretty good too.

I tried that, but the lung tissue broke up, started bleeding, and got stuck between the keys. Then I had to find something else to clean up the lung chunks.

[BTF]Sigma · « **Reply #4 on:** April 22, 2008, 09:38:43 PM »

Daemia · « **Reply #5 on:** April 23, 2008, 11:45:40 AM »

Quote from: DWxchzrles on April 22, 2008, 04:21:22 PM

i have to clean the inside of the computer?

never have!

haha DWxchzrles! at least you can claim you didnt know

I'm just lazy and never have cleaned mine either. Probably an inch of dust and dog hair in everything haha

UUD-40 · « **Reply #6 on:** April 23, 2008, 03:53:20 PM »

I semi-regularly clean mine, only cause I remember paying a lot for it.

[BTF] Reflex · « **Reply #7 on:** April 24, 2008, 05:04:02 AM »

Giving yer PC a good BJ every so often is a good idea.

layers of dust house dust mites,
a thriving family of these can do wonders for shorting out just about any kind of component.

hehe, a 'bug' in the system still applies I guess

Ewwwww...

[BTF]Sigma · « **Reply #8 on:** April 24, 2008, 07:56:40 AM »

Don't catch a virus from BJing your PC

|iR|Focalor · « **Reply #9 on:** April 24, 2008, 04:23:30 PM »

Speaking of which....

Probably a month ago, I broke my old system down piece by piece and cleaned the 10 year old dust out of it. I put everything back in the same way, same cable connections, I'm mean EVERYTHING. When I started it back up, the floppy drive won't work anymore. The BIOS was set to check the floppy drive for a boot disk first before starting up. I had to go into the BIOS and disable boot from floppy on startup, otherwise I'd have to hit f1 to skip it. I don't think the drive is completely toast, the light on the drive is ALWAYS on now even though it won't read from it. Any suggestions anyone?

[BTF]Gator · « **Reply #10 on:** April 24, 2008, 06:50:26 PM »

hammer.

lighter fluid.

lighter.

Whirlingdervish · « **Reply #11 on:** April 24, 2008, 08:03:20 PM »

your best bet may be to assume that it's a goner. buy a media card reader drive with floppy drive to replace it, in the off chance that you like/use boot disks.. I ghost my HDs using a boot disk I made years ago, so I kinda like having the drive available, but for most people it's just taking up space.

if you don't need it, just get a blank faceplate for the slot it used to go in.

jägermonsta · « **Reply #12 on:** April 25, 2008, 04:02:46 AM »

Quote from: [EoM]Focalor on April 24, 2008, 04:23:30 PM

Speaking of which....

Probably a month ago, I broke my old system down piece by piece and cleaned the 10 year old dust out of it. I put everything back in the same way, same cable connections, I'm mean EVERYTHING. When I started it back up, the floppy drive won't work anymore. The BIOS was set to check the floppy drive for a boot disk first before starting up. I had to go into the BIOS and disable boot from floppy on startup, otherwise I'd have to hit f1 to skip it. I don't think the drive is completely toast, the light on the drive is ALWAYS on now even though it won't read from it. Any suggestions anyone?

Sounnds like you have the interface cable connected wrong.

Located pin 1 on the cable (pink or red line) and connect it to the slot 1 of motherboard.

Sometimes it takes a bunch of trial and error before you get it right...

Art · « **Reply #13 on:** April 26, 2008, 12:48:23 AM »

^^
What Jager said.
Everytime I've had a floppy drive with the symptoms you've described, it's always been the interface cable.

|iR|Focalor · « **Reply #14 on:** April 26, 2008, 10:31:20 AM »

I really don't think it could be the cable. I made sure to reconnect the exact same cables in the exact same slots they were in before taking it all apart. I labelled everything to make sure I connected it back the exact same way it was before removal. I'll try screwing the cable, but I doubt it'll fix anything.

Author Topic: Why I will never (Read 8673 times)

El Box de Shoutamente