Author Topic: Server Question (Read 4314 times)

bomber · « **on:** April 12, 2006, 11:18:33 AM »

Well i pretty much have everything done the right way but the only problem i have is i cant figure out whats the IP to connect to. When i open the server and mini mize it then open Q2 and go to join server it Shows it there and lets me connect just find and everything is the way i want but its the IP i dunno what to type connect sdfjsdhfsdjkh heres a SS if this helps

Shovel.Ds · « **Reply #1 on:** April 12, 2006, 11:42:56 AM »

Go to www.dnsstuff.com and then look in the top roght corner of page, that will tell you your external ip...that is the ip for your server

bomber · « **Reply #2 on:** April 12, 2006, 11:51:48 AM »

i appreciate the reply

I tryed connect 24.63.59.173

thats the ip that was in the right top corner but it dosnt work. Any other suggestions?? Im so close i dont wanna give up!

bomber · « **Reply #3 on:** April 12, 2006, 12:07:12 PM »

come on someone has to be on that can help

ĄƦçɧąɳɠҾԼ · « **Reply #4 on:** April 12, 2006, 01:07:06 PM »

If your server is running from behind a router, then you have to forward the port in the router in order to connect to it from outside your network.

bomber · « **Reply #5 on:** April 12, 2006, 01:12:58 PM »

in english you think you can help me do that?

ĄƦçɧąɳɠҾԼ · « **Reply #6 on:** April 12, 2006, 01:23:52 PM »

Well, I'll try my best.

First let me know what the brand and model of the router you have is.

bomber · « **Reply #7 on:** April 12, 2006, 01:29:17 PM »

i got the comcast box that came with the cable then i got another box both hooked up to the same shyt.

Wireless-B 2.4 GHz 802.11b
Broadband Router
Linksy

Model:BEFW11S4

ĄƦçɧąɳɠҾԼ · « **Reply #8 on:** April 12, 2006, 01:58:04 PM »

First what you want to do is make sure the computer that is running the Q2 server is set to use a static IP and not have a random one assinged by the router.

First log into your router, http://192.168.1.1

Look for a tab that says "DHCP", note what the IP range is, you want to set the Q2 server PC on an IP outside this range.

On the computer that running the Q2 server, open Network Connections, right-click on your network card (usually "Local Area Connection") and select properties.

Then from the list in the middle select "Internet Protocol (TCP/IP)", and select properties.

Change it to "Use the following IP address", put the IP that you want to use in here, the default gateway is the IP of your router (192.168.1.1) and subnet mask should fill itself in. Then don't forget to put in the DNS servers to use, those IP's can be found on your routers status page.

Here's a screenshot of how mine is set,

Then after that make sure you can still browse the web and stuff from that computer.

If you can then follow this guide, for forwarding the port in your router,
http://www.portforward.com/english/routers/port_forwarding/Linksys/BEFW11S4/Quake_2.htm

Hopefully that helps, if you have more questions on anything please ask, I can provide more screenshots if needed.

bomber · « **Reply #9 on:** April 12, 2006, 02:09:36 PM »

is there anyway to find out the PW for my router to login?

Cuz i never had to login before the comcast stays on 24/7 everyday

ĄƦçɧąɳɠҾԼ · « **Reply #10 on:** April 12, 2006, 02:15:45 PM »

User name =
Password = admin

User name should be blank, but if it says you need one then use admin for that as well.

bomber · « **Reply #11 on:** April 12, 2006, 03:11:27 PM »

do you GOT msn?? They got a add on where you connect to the other user real quick and then you have access to my PC and you can do it and i watch you lol. Cuz i must of did something wrong.

ĄƦçɧąɳɠҾԼ · « **Reply #12 on:** April 12, 2006, 04:01:26 PM »

Hmm, no I don't have MSN, nor will I install that. I'm very picky about programs that go on my computer. I do however use Trillian for Yahoo and AIM, and I use Google Talk.

As an alternative to forwarding the port you can use port triggering.
http://www.portforward.com/english/routers/port_triggering/Linksys/BEFW11S4/Quake_2.htm

That is kind of like an automatic forward of the port as needed.

bomber · « **Reply #13 on:** April 12, 2006, 04:10:25 PM »

that program is asking to be registerd.. Not gonna work with out register key and name it says.

ĄƦçɧąɳɠҾԼ · « **Reply #14 on:** April 12, 2006, 04:33:18 PM »

You don't need there program to do it.

Just setup the stuff in the port triggering section of your router.

Author Topic: Server Question (Read 4314 times)

El Box de Shoutamente